Mount your picture cheaply

This is what you might need to do to install your snap shots while avoiding emptying your bank account. Simply following is what it's required:

- Snap off Pocket Knife with a capable grip and interchangeable blades. The latter is an important instrument for the process, so choose it carefully. You may be able to obtain it in any hardware store or on the net.
- Spray Adhesive or Image Spray Adhesive (maybe 3M). The Spray is normally better than the Picture Spray, but it's stronger therefore might impact you photography paper after a long time in case it is thin. You can purchase it on the net or even in retailers like Staples.
- A long metal ruler. The ruler has to be at the least having the longest side as the one of your image, that allows you to be ready to cut it in one go, and made of steel to prevent it being scratched.
- Foam board to mount your picture on - 5mm the minimum, in order to be flat, solid together with a good compromise of cost and style. You could find it in shop such as Staples or on the net.
- You could additionally obtain a cutting mat and a plate wall mount hanger.
- For people who have retained your photographs rolled, you must have a double sided thin tape as well.

It is time to begin right now!

- If you have had kept your picture in a rolling case till now, then it's wise to try to even out it to start with.
- Spray the back of photo. It is advisable completing this task outside or in a well ventilated space and you should be careful of not breathing in it, considering that the spray mount take few days to dry completely. You can also put down the photograph on a rag, and spraying from distance for an extra even coverage. Don't forget to position clean newspapers for every single image otherwise your next photograph will bond to the paper. Leave the snapshot for few moments (10 seconds should be enough) in order for the glue become sticky before moving to the next step.

- Place the sticky surface of the image over the foam board. By experience, I have come across that the 3M spray allows you to move your image if necessary up to few days afterwards. If your photograph has actually been placed rolled in some case, you might to add 4 little pieces of dual sided adhesive tape sandwiched between the tacky side of the photo and the foam board, by the corners of the photograph.

- Cut the piece of the board over exceeding beyond the picture; better doing this to accomplish it in one single move - razor-sharp knife blade is the answer. This is really important mainly because the foam board is deep and it shows the slant of the sharp edge. Or else, if you control to get the same cutting slant, you can accomplish it in a few moves with no substantial degradation.

- Depending on the way in which (just in case) you wish to hang up your picture you might want to add your plate wall mount hanger now.

And at last if you'd like more details or you are interested in various other (more complicated and stylish) methods for mounting your image you could possibly visit the image mounting website I am contributing to. Nino J.

- Your photograph is now prepared to be exhibited!

Happy mounting!